NOBL TravelHelp Center

Set or reset your lock code

Steps for

Carry-On: All-in-One 19"

Front compartment lock

Set a new code

  1. Turn the dials to 0-0-0.
  2. Press and hold the reset button, right next to the dials, with a pen or similar tool.
  3. While holding the button, turn the dials to your new code, for example 3-1-7.
  4. Release the button. Your new code is saved.

Open and lock

  • To open, turn the dials to your code and push the button to the left.
  • To lock, close the compartment and scramble the dials.
How to set the front compartment lock

Main compartment locks

Set a new code

  1. Find the small switch under the clasp. Slide it to the left, to SET.
  2. Turn the dials to your new code, for example 8-8-8.
  3. Slide the switch to the right, back to OFF. Always leave it on OFF when you're done.
  4. Repeat on the second clasp lock.

Open and lock

  • To open, turn the dials on both locks to your code and press the push button on each one.
  • To lock, close the case, close all the clasps and scramble the dials on both locks.
How to set the main compartment locks
Write your new code down somewhere safe.
If the TSA keyhole has been turned
Airport security can open the lock with a TSA key. If the keyhole was left turned, the lock won't work properly. Turn it back with a pen tip until the slot points at the red dot.

Did this help?

Still need help?

Chat with our team and we'll pick up from here.

More for your Carry-On: All-in-One 19"

Lock won't openWhat to check when the right code doesn't open your suitcase.Charge your phone from your suitcaseUse the USB ports on the lock with your own power bank.Clean and store your luggageKeep the shell, lining, locks and wheels in good shape.